MasonPilot
Home › Guides › Polymeric Sand, Done Right the First Time

Polymeric Sand, Done Right the First Time

Updated November 2026 · Connecticut pricing and practice

Polymeric sand is a great product with zero tolerance for shortcuts. Every failure mode, haze, crust, washout, traces back to one of a handful of rules.

Coverage: why the bag label betrays you

Paver typeTypical jointCoverage per 50-55 lb bag
Standard concrete pavers, tight joints⅛" to ¼"60 to 80 sq ft
Tumbled / textured pavers¼" to ½"35 to 55 sq ft
Slabs or irregular flagstone, wide joints½" to 1"+20 to 35 sq ft

Thicker pavers mean deeper joints mean more sand. This is why the calculator figures joint fill from your actual product instead of a per-bag guess.

The rules that prevent the classic failures

Buying for a new patio? Get the paver quantities, base tonnage, and the joint-sand bag count in one pass from the calculator, it reads joint width from the product you actually picked.

Where these numbers come from

Coverage per bag follows the manufacturer technical data sheets (Alliance Gator Maxx G2 and Techniseal are the references the calculator sizes from), stated per joint width and paver size. Install rules follow the same sheets and CMHA (formerly ICPI) guidance on joint sand and sealing. Your bag count on the results page is sized from these tables for the product and joint you chose.

Get your exact quantities in about two minutes Pallets, tons, bags, base depth and dig volume from manufacturer catalog data. Someone calls you before anything is ordered.
Get your exact bag count